|
CNCnet DNC
|
CNCnet DNC: CNCnet DNC integrates your CNC machine controls with serial (RS232) interface directly into your network and controls an unlimited number CNCs simultaneously on a single computer. Cabling can either be made by using a direct cable, a serial - network interface or a wireless module. No need for Computers or special terminals at the shopfloor area.
All transmission activities can be controlled by the operator panel of the machine.
Protocols included: ACIERA, DDCMP, Mazatrol CMT, MEFI/Trans, BPA/9, LSV2, PRN, 3964/3964R, Heidenhain, PTR-Simulator
Supports various interfaces: real or virtual COM ports (USB, WLAN, device and COM Servers)
Setup of machine specific transmission parameters (leading - trailing sequences / characters, change or replace characters, send specific HEX ASCII codes). Recharge (drip feed) operation mode for large programs (SW / HW handshake)
Suitable for Microsoft Windows XP (x32-x64), Vista (x32-x64), Server 2003 (x32-x64), Server 2008 (x32-x64), Virtual PC 2004 – 2007, Virtual Server 2005 and Hyper V Server 2008
Pre-built machine specific setup files for more than 800 types of machines are available from Inventcom
Integration of Pre- and Postprocessors for automatic NC file manipulation (Replace Characters, separate and modify NC files, format tool preset data).
|
|
